0

Busses & Shuttles

DOWNLOAD BROCHURE

Keep Your Drivers & Passengers Safe 

Frustrated by OEM applied coatings and tapes peeling off after only a few months in the field? Make a long-term commitment to safety with Safeguard Anti-Slip Products. 

School buses, city buses, airport and hotel shuttles, and even RVs need to have anti-slip protection. Specify Safeguard Anti-Slip products on your new bus order or retrofit your existing fleet with our covers today. 

PRODUCT OVERVIEW

Extra Traction on Wheelchair Ramps, Lifts, Steps, Trim, and More 

Entering and exiting transportation vehicles can be dangerous, especially when carrying luggage or children. Our covers exceed OSHA and ADA guidelines to give you the best traction and outlast other temporary anti-slip solutions. 

Step Covers

3” Safeguard Hi-Traction® Step Covers are used when the rubber on the leading edge is worn, cracked, or missing, but the tread is in good condition. The white portion can be removed and replaced with a 3” deep Safeguard® Step Cover.

Full Tread Step Covers are used when the entire rubber step is worn, slippery, or in need of a “facelift.” In keeping with School Bus Standards, the first 3” of the Step Cover is white, while the remaining depth (up to 15”) can be configured in a contrasting darker color such as black or blue.

Coefficient of Friction

Safeguard Technology’s unique surface nearly doubles both OSHA’s 0.5 and ADA’s 0.6 guidelines for Coefficient of Friction values, as confirmed in independent lab testing using the Mark II Model of the Brungraber slip tester. Even in wet or oily conditions, these guidelines are greatly exceeded.

Cleaning & Maintenance

Cleanup is a snap using a non-solvent cleaner and a stiff bristle brush. Please refer to the installation and cleaning guide for complete instructions.

Wheelchair Ramps & Lifts

Safeguard Vinyl (Flexible PVC) with Pressure Sensitive Adhesive is the ideal solution for eliminating slippery conditions on wheelchair ramps and lifts. The high-quality adhesive laminate provides an easy, one-step “peel-and-stick” installation that will provide anti-slip protection for years of service.

Color Standards

White is the standard for the leading step edges on school buses. When covering more than the initial 3” area, combining white with a contrasting color creates an attractive solution that helps hide dirt and wear from foot traffic. Safeguard HiGlo-Traction® offers the standard white during the day with the added benefit of photoluminescent “glow-in-the-dark” performance when dark. Once charged by natural or fluorescent light, these covers emit a visible glow for many hours, improving safety during early morning and evening use.

Installation

Installation is easily achieved using mechanical fasteners, adhesive, or a combination of both. Vinyl Walkway Covers are available with PSA (pressure sensitive adhesive).

Where You’ll Find SAFEGUARD®

  • Airport and Hotel Shuttles
  • City (Municipal) Buses
  • Recreation Vehicles (RVs)
  • School Buses

Recommended Products

Direct Gritting applied to the step on an OTR truck

Anti-Slip Direct Gritting

When a cover isn’t practical, we offer our Hi-Traction® direct gritting anti-slip surface bonded directly to a supplied material.

Anti-Slip Direct Gritting
Safeguard Two-Tone Black & Yellow Step Cover

Anti-Slip Step Covers

Workers are just one slip away from a serious accident. Our Step Covers are easily installed over existing steps, ensuring a safer environment by covering the leading edge with superior anti-slip material.

Anti-Slip Step Covers
Safeguard anti slip walkway covers installed on a metal access ramp outside of an airport

Anti-Slip Walkway and Ramp Covers

For injury-free operations and emergency preparedness, our safety covers turn platforms, decks, catwalks, ramps, and any flat area into safer non-skid zones.

Anti-Slip Walkway and Ramp Covers