Standard Colors

red anti-slip grit
Red
green
Green
Fluorescent Green
Fluorescent Green
black anti-slip grit
Black
Beige
Beige
Fluorescent Orange
Fluorescent Orange
brown anti-slip grit
Brown
White
White
Glo Series Pink
Fluorescent Pink
gray anti-slip grit
Gray
orange
Orange
PPE Blue
PPE Blue
safety yellow
Safety Yellow
blue
Blue

The samples on this web page serve only as a visual guide for initial selection of color. Actual finished product color may vary slightly from the version shown on your monitor based on grit size (coarseness) as well as the base material of construction.

For an accurate depiction, please Request a Sample

HiGlo-Traction®

Our glow-in-the-dark products use an embedded inorganic photoluminescent pigment that creates a green/yellow glow when active. The pigment is non-toxic, non-radioactive, and can be recharged repeatedly during the life of the product. HiGlo-Traction Covers are an effective safety solution for both outdoor and indoor applications, with “Glow-in-the-Dark” visibility for many hours after the light source has been removed. The photoluminescent pigment is fully recharged after 5 minutes of exposure to sunlight, 8 minutes at dusk, or 10 minutes in fluorescent light. As expected, the degree of brightness depends on the strength and nature of the light source. The higher the UV output, the brighter the illumination. Sodium vapor and red light yield no activation.
Safeguard has a variety of HiGlo, Glow-in-the-dark colors for anti-slip products. Contact Safeguard today to learn more
Glo-White
Glo-White
Glo-Lime
Glo-Lime
Glo-Orange
Glo-Orange
Glo-Green
Glo-Green
Glo-Yellow
Glo-Yellow
Glo-Pink
Glo-Pink

The samples on this web page serve only as a visual guide for initial selection of color. Actual finished product color may vary slightly from the version shown on your monitor based on grit size as well as the base material of construction.

For an accurate depiction, please Request a Sample

Premium Colors

Safeguard premium colors offer a contemporary color palette for non-industrial applications. These designer colors fit the aesthetic requirements for anti-slip protection at schools, commercial offices, institutional buildings, hotels and personal residences.

Speckle Photo
Speckle Photo
Mentor Sand
Mentor Sand
Ekriz Brown
Ekriz Brown
Bainbridge Blue
Bainbridge Blue
Chagrin Chocolate
Chagrin Chocolate
Geauga Green
Geauga Green
Grand River Gray
Grand River Gray
Ipswich Olive
Ipswich Olive
Erie Blue
Erie Blue
PM Salmon
PM Salmon
Hudson Hunter
Hudson Hunter
Garfield Gray
Garfield Gray
Newbury Sky
Newbury Sky
Brisbane Brick Red
Brisbane Brick Red

The samples on this web page serve only as a visual guide for initial selection of color. Actual finished product color may vary slightly from the version shown on your monitor based on grit size (coarseness) as well as the base material of construction.

For an accurate depiction, please Request a Sample

Two-Tone Color Configurations

Safeguard colors can be combined to create a two-tone configuration.

Contrasting color:

  • on the nosing and vertical lip of a Step Cover, calls attention to the leading edge of a stair.
  • on the perimeter of a Walkway Cover designates a change in surface texture and signifies a safe walk zone.
  • can also be configured on Ladder Rung Covers and is standard on all Pipe and Cable Covers.
Image of two-tone black and safety yellow Safeguard anti-slip step cover

Save money with solid colors and glow-in-the-dark edging or nosing

An economical alternative to full photoluminescent covers is combining with a solid color. Not only do you have a two-tone configuration in the light, but also the benefit of glow in the dark when the light source is removed.

Image of two-tone ladder rung cover
Image of Safeguard two-tone glow in the dark walkway cover

Descriptive Marking

Reinforce Your Corporate Safety Message and PPE Requirement

Overhead safety warnings and signage can actually create a slip, trip and fall situation when the person fails to look down while walking. Worse yet, in the event of a fire or emergency, smoke and darkness often conceal overhead signage and directional guidance.

The image or message is embedded into the cover, not just printed on the surface, so it will last for the life of the product and not wear off.

Safeguard step covers with 'Use Handrail' markings

Critical Safety Message

Commonly used phrases include:

  • Use Handrail
  • Use Trailing Hand Technique
  • Danger Zone
  • Watch Your Head
Image of Safeguard anti-slip step cover with safety messaging, use the trailing hand technique, embedded into surface.
Image of Safeguard anti-slip walkway cover with safety messaging, escape route, embedded on surface.

Personal Protective Equipment (PPE) Safety Symbol

Image of glow-in-the-dark safety symbols on Safeguard anti-slip cover.

Incorporating PPE Safety Symbols that are visible at floor level greatly increases the exposure of important safety warnings and messages. As workers and pedestrians look down while walking on hazardous areas or steps, these symbols act as a simple reminder to act and think safely. Combine with a glow-in-the-dark background for visibility after dark, during power outages, and emergency evacuations.

Custom Logos

We can incorporate your company logo and other custom graphics into Safeguard covers. Descriptive and informational markings do not affect the slip prevention performance of Safeguard covers. Contact us today to learn more about customizing your anti-slip covers.

Image of a custom logo on Safeguard anti-slip cover. Contact us to customize your covers today
Image of a custom logo on Safeguard anti-slip cover. Contact us to customize your covers today
Image of a custom logo on Safeguard anti-slip cover. Contact us to customize your covers today
Image of a custom logo on Safeguard anti-slip cover. Contact us to customize your covers today